SAM Hydraulic Motor in Variable Option of Orbit Make Hydraulic Motor Suppliers By Orbit Hydraulic System
BGM Hydraulic Motor Variation
BGM • FRO – Standard version with rear panel connectors (30.4 mm) Hydraulic Motor
BGM • SP1 – with side ports (30.4 mm) Hydraulic Motor
BGM • FRQ – like FRO, with throttle body terminals for slow speed
Orbital Motors BGM Series
Power element: Gerotor
Displacement: da 13 a 50 cm³/rev [from 0.8 to 3.1 in³/rev]
Maximum pressure: cont. 100 bar [1450 psi] int. 140 bar [2030 psi]
Maximum oil flow: 25 l/min [7 U.S. gpm]
Maximum speed: 1935 rpm
Maximum torque: cont. 50 Nm [37 lbf * ft] int. 83 Nm [61 lbf * ft]
Maximum power: 3.3 kW [4.4 hp]
Spool valve design and gerotor gear set hydraulic motor with compact design and small displacement. Suitables for application where high speed and small dimensions are required.
Orbital Motors BG - BH Series
Power element: Gerotor
Displacement: from 40 to 400 cm³/rev [from 2.4 to 24.4 in³/rev]
Maximum pressure: cont. 140 bar [2030 psi] int. 175 bar [2537 psi]
Maximum oil flow: 75 l/min [20 U.S. gpm]
Maximum speed: 1625 rpm
Maximum torque: cont. 360 Nm [265 lbf * ft] int. 440 Nm [324 lbf * ft]
Maximum power: 15 kW [20.1 hp]
BG series motors feature spool valve design and gerotor gear set. They are economical motors able to accomplish light to medium duty applications.
BG Hydraulic Motor Variation
• BG S – Standard version with side ports (40×8 mm) without non-return valves
• BG E – with side ports (36×36 mm) with or without check valves
• BG P – with additional ports in endcap (standard connectors 40×8 mm with plug) and check valves
• BH S – with side ports (45.7 mm without dislocation) without check valves
• BH P – with additional ports in endcap (lateral 45.7 mm with plug) without check valves
• FRO – Standard version with rear panel connectors (30.4 mm)
BR Hydraulic Motor
• BR O – Standard version with side ports (40×8 mm) with check valves
• BR P – with additional ports in the end cover (40×8 mm lateral ports with plugs), no check valves
• BR E – with side ports (36×36 mm) with or without check valves
• BS O – with side ports (45.7 mm non-translation), without non-return valves
Orbital Motors AR Series
Power element: Roller
Displacement: from 50 to 400 cm³/rev [from 3.1 to 24.4 in³/rev]
Maximum pressure: cont. 160 bar [2320 psi] int. 190 bar [2755 psi]
Maximum oil flow: 80 l/min [21 U.S. gpm]
Maximum speed: 970 rpm
Maximum torque: cont. 380 Nm [280 lbf * ft] int. 520 Nm [383 lbf * ft]
Maximum power: 15,7 kW [21 hp]
Roller gear set hydraulic motors with pressure compensated valve plate and built-in roller bearings. The ARS series with tapered roller bearings can withstand high radial and axial forces.
ARS – Standard version with side ports (40×8 mm)
ARSW – version with the recessed mounting flange for wheel hub / winch drum assembly (radial load in the middle between the two tapered roller bearings)
ARF – Version with negative safety brake (. Opening pressure 22 ÷ 27 bar, max pressure 200 bar, static brake torque 350 Nm)
Orbital Motors HR Series
Power element: Roller
Displacement: from 80 to 400 cm³/rev [from 4.9 to 24.4 in³/rev]
Maximum pressure: cont. 205 bar [2972 psi] int. 310 bar [4495 psi]
Maximum oil flow: 95 l/min [25 U.S. gpm]
Maximum speed: 995 rpm
Maximum torque: cont. 885 Nm [652 lbf * ft] int. 980 Nm [722 bf * ft]
Maximum power: 44 kW [59 hp]
The squared stator roller gear set, the hydrostatically balanced rotating valve plate driven by dedicated drive shaft and the heavy duty bearings make the HR series motors suited for application where high power and high operating pressure are required. The design solutions implemented in this model allow to reach power up to 44.2 kW [59.2 hp].Orbit Make Hydraulic Motor India
HR Series Hydraulic Motor variation in Place of Orbit Make Hydraulic Motor
Variants
• HRS – Standard
• HRW – version with the recessed mounting flange for wheel hub / winch drum assembly (radial stress point between the two tapered roller bearings)
• HRC – short bearingless configuration (without bearing housing, bearings and output shaft)
• HRF – Version with front brake –negative effect (Opening pressure 25 ÷ 30 bar, max pressure 210 bar, brake torque, static 210 ÷ 560 Nm)
• HRL – version with the recessed mounting flange and front brake maintenance
• HRM – ultra short bearingless construction for installation into gear
Orbital Motors HT Series
Power element: Roller
Displacement: from 160 to 500 cm³/rev [from 9.8 to 30.5 in³/rev]
Maximum pressure: cont. 200 bar [2900 psi] int. 240 bar [3480 psi]
Maximum oil flow: 150 l/min [40 U.S. gpm]
Maximum speed: 780 rpm
Maximum torque: cont. 1220 Nm [900 lbf * ft] int. 1370 Nm [1010 lbf * ft]
Maximum power: 40 kW [53.6 hp]
• HTS – Standard Version
• HTC – short bearingless configuration
Orbital motors with high performance squared stator roller set, separately driven and hydrostatically balanced valve plate and tapered roller bearings. The design solutions used in this model allow to reach pressures up to 280 bar [4060 psi] and power up to 40 kW [53.6 hp]. These motors are suitable for applications where high torque, continuous duty or frequent inversions of the sense of rotation are required.
Brevini Mobile Control Valves Replace India :
· HPV41 - HPV77 Proportional directional valves,
· Monoblock and sectional valves,
· HPV310 Proportional directional valves
Aron Hydraulic Valves :
Flow Control Valves : QC32 Flow control, QC33 Flow control, QCV32 Flow control
Directional control Valves : CETOP 2/NG04, Directional control valves CETOP 3 solenoid operated with reduced overall size, CETOP 3 in accordance with ATEX directive - AD3XG, CETOP 5/NG10 Directional Valves, CETOP 5/NG10 high performances, Automatic reciprocating valves, Piloted valves CETOP 5/NG10 - CETOP 7/NG16 - CETOP 8/NG25, Six ways flow divertes
· Flow control
· Directional control
· Modular valves
· Cartridge / In Line valves
· Proportional contr.valves
· Bankable valves
· Axial valves
· Orbital valves
· Pressure control
SAM – Aron Hydraulic Axial Piston Motors Pumps:
· SH11C Series Hydraulic Axial Piston Pumps
· H1C Series Hydraulic Axial Piston Pumps
· H1V Series Hydraulic Axial Piston Pumps
· H1V PV Pump Hydraulic Axial Piston Pumps
· S5AV Series Hydraulic Axial Piston Pumps
· S6CV Series Hydraulic Axial Piston Pumps
· MD10V Series Hydraulic Axial Piston Pumps
· SH11CR Series Hydraulic Axial Piston Motors
· H1CR Series Hydraulic Axial Piston Motors
· SH7V Series Hydraulic Axial Piston Motors
· SH7VR Series Hydraulic Axial Piston Motors
· H2V Series Hydraulic Axial Piston Motors
· MD11V Series Hydraulic Axial Piston Motors
These units are most commonly found on Industrial Sweepers, Road Sweepers, Refuse Lorries, Tractors, Agricultural and Farm Machinery, Combined Harvesters, Grass Cutting Machines, Construction Machinery, Conveyors, Cement Mixers etc. etc.
The Gerotor Hydraulic Motor Range offered generally interchanges with other Hydraulic Motors of the Gerotor and Geroller Type such as Danfoss OMP, Danfoss OMR, Danfoss OMV, Danfoss OMS, Danfoss OMT, White MP, White MR etc. etc. If you have the Original Equipment Part Number then we can probably match it. Whatever Price you have been given elsewhere we can probably BEAT it!
Contact Details:
Vishal Pipavat
Call Us
Ahmedabad Gujarat India : 09998789116
Mumbai Maharashtra India : 08000000816
E-mail: hydraulicmotor@gmail.com
E-mail: orbithydraulic@gmail.com
For More Details Visit Website:
www.orbithydraulic.com